近期（2016-）以主要作者发表的论文

[1] Pang Y, Feng P, Wang J, et al. Performance analysis of the longitudinal-torsional ultrasonic milling of Ti-6Al-4V[J]. The International Journal of Advanced Manufacturing Technology. 2021: 1-12.

[2] Wang J, Liao W, Guo P. Modulated ultrasonic elliptical vibration cutting for ductile-regime texturing of brittle materials with 2-D combined resonant and non-resonant vibrations[J]. International Journal of Mechanical Sciences. 2020, 170: 105347.

[3] Wang J, Wang Y, Yang Y, et al. Fabrication of structurally colored basso-relievo with modulated elliptical vibration texturing[J]. Precision Engineering. 2020, 64: 113-121.

[4] Wang J, Yang Y, Zhu Z, et al. On ductile-regime elliptical vibration cutting of silicon with identifying the lower bound of practicable nominal cutting velocity[J]. Journal of Materials Processing Technology. 2020: 116720.

[5] Wang Y, Wang J, Chen A, et al. Structural coloration using face turning and variable tool vibration frequency[J]. Journal of Manufacturing Processes. 2020, 56: 1392-1396.

[6] Wang J, Yang R, Gao S, et al. Modulated vibration texturing of hierarchical microchannels with controllable profiles and orientations[J]. CIRP Journal of Manufacturing Science and Technology. 2020, 30: 58-67.

[7] Wang J, Yang Y, Yang R, et al. On the validity of compliance-based matrix method in output compliance modeling of flexure-hinge mechanism[J]. Precision Engineering. 2019, 56: 485-495.

[8] Wang J, Du H, Gao S, et al. An ultrafast 2-D non-resonant cutting tool for texturing micro-structured surfaces[J]. Journal of Manufacturing Processes. 2019, 48: 86-97.

[9] Wang J, Zhang J, Feng P, et al. Damage formation and suppression in rotary ultrasonic machining of hard and brittle materials: a critical review[J]. Ceramics International. 2018, 44(2): 1227-1239.

[10] Wang J, Zhang J, Feng P, et al. Experimental and theoretical investigation on critical cutting force in rotary ultrasonic drilling of brittle materials and composites[J]. International Journal of Mechanical Sciences. 2018, 135: 555-564.

[11] Wang J, Zhang J, Feng P, et al. Feasibility study of longitudinal–torsional-coupled rotary ultrasonic machining of brittle material[J]. Journal of Manufacturing Science and Engineering. 2018, 140(5).

[12] Wang J, Feng P, Zhang J. Reducing edge chipping defect in rotary ultrasonic machining of optical glass by compound step-taper tool[J]. Journal of Manufacturing Processes. 2018, 32: 213-221.

[13] Wang J, Feng P, Zhang J, et al. Experimental study on vibration stability in rotary ultrasonic machining of ceramic matrix composites: cutting force variation at hole entrance[J]. Ceramics International. 2018, 44(12): 14386-14392.

[14] Wang J, Feng P, Zhang J, et al. Reducing cutting force in rotary ultrasonic drilling of ceramic matrix composites with longitudinal-torsional coupled vibration[J]. Manufacturing letters. 2018, 18: 1-5.

[15] 王健健，张建富，冯平法. 航空先进材料旋转超声椭圆振动加工研究进展[J]. 航空制造技术. 2018, 61(21): 30-37.

[16] Wang J, Yang Y, Guo P. Effects of vibration trajectory on ductile-to-brittle transition in vibration cutting of single crystal silicon using a non-resonant tool[J]. Procedia CIRP. 2018, 71: 289-292.

[17] Feng P, Wang J, Zhang J, et al. Drilling induced tearing defects in rotary ultrasonic machining of C/SiC composites[J]. Ceramics International. 2017, 43(1): 791-799.

[18] Wang J, Feng P, Zhang J, et al. Investigations on the critical feed rate guaranteeing the effectiveness of rotary ultrasonic machining[J]. Ultrasonics. 2017, 74: 81-88.

[19] Wang J, Feng P, Zha T. Process monitoring in precision cylindrical traverse grinding of slender bar using acoustic emission technology[J]. Journal of Mechanical Science and Technology. 2017, 31(2): 859-864.

[20] Wang J, Feng P, Zhang J, et al. Experimental investigation on the effects of thermomechanical loading on the vibrational stability during rotary ultrasonic machining[J]. Machining Science and Technology. 2017, 21(2): 239-256.

[21] Wang J, Zhang J, Feng P. Effects of tool vibration on fiber fracture in rotary ultrasonic machining of C/SiC ceramic matrix composites[J]. Composites Part B: Engineering. 2017, 129: 233-242.

[22] Feng P, Wang J, Zhang J, et al. Research status and future prospects of rotary ultrasonic machining of hard and brittle materials[J]. J. Mech. Eng. 2017, 53: 3-21.

[23] Wang J, Zhang C, Feng P, et al. A model for prediction of subsurface damage in rotary ultrasonic face milling of optical K9 glass[J]. The International Journal of Advanced Manufacturing Technology. 2016, 83(1-4): 347-355.

[24] Wang J, Feng P, Zhang J, et al. Modeling the dependency of edge chipping size on the material properties and cutting force for rotary ultrasonic drilling of brittle materials[J]. International Journal of Machine Tools and Manufacture. 2016, 101: 18-27.

[25] Wang J, Zha H, Feng P, et al. On the mechanism of edge chipping reduction in rotary ultrasonic drilling: a novel experimental method[J]. Precision Engineering. 2016, 44: 231-235.

[26] 王健健，冯平法，张建富，等. 卡盘定心精度建模及其保持特性与修复方法[J]. 吉林大学学报 (工学版). 2016, 46(2): 487-493.

[27] Wang J, Feng P, Zheng J, et al. Improving hole exit quality in rotary ultrasonic machining of ceramic matrix composites using a compound step-taper drill[J]. Ceramics International. 2016, 42(12): 13387-13394.

[28] Wang J, Feng P, Zhang J. Investigations on the edge-chipping reduction in rotary ultrasonic machining using a conical drill[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2016, 230(7): 1254-1263.

[29] 王健健，张建富，冯平法，等. 楔式动力卡盘的径向夹持刚度特性研究[J]. 机械工程学报. 2016, 52(11): 129-139.

[30] 王健健，冯平法，张建富，等. 动力卡盘高爪最优配车锥角及配车方法[J]. 中南大学学报 (自然科学版). 2016(2016 年 06): 1896-1905.

[31] Wang J, Feng P, Zhang J. Reduction of edge chipping in rotary ultrasonic machining by using step drill: a feasibility study[J]. The International Journal of Advanced Manufacturing Technology. 2016, 87(9): 2809-2819.