李　勇-清华大学机械工程系

李　勇

长聘教授（博导）

联系电话：010-62772212

E-mail地址：liyong@mail.tsinghua.edu.cn

通信地址：清华大学机械工程系制造工程研究所

办公地点：李兆基科技大楼A929室 (100084)

1987－1991 日本新潟大学精密工学专业，博士学位

1985－1987 日本新潟大学精密工学专业，硕士学位

1983－1985 哈尔滨工业大学、大连外国语、日本新潟大学，日语培训

1978－1982 哈尔滨工业大学机械制造工程系，学士学位

迄今获授权国家发明专利47项、软件著作权4项。获省部级科技奖一等奖2项、二等奖2项。发表学术研究论文200余篇，其中SCI收录论文30余篇，EI收录60余篇。

主要代表性论文如下：

(1) Yong LI, Hiroyasu IWABE, et al., “Study on improvement of machining accuracy in cornering cut with end mill ”, JSME International Journal, Series Ⅲ, Vol.35, No.1 (1992) pp.168-173.

(2) 李勇，胡敏，等：「提高输出推力的蠕动式微进给定位机构」，压电与声光, Vol.21, No.5 (1999)pp.407-410.

(3) 李勇，王显军，等：『微细电火花加工关键技术研究』, 清华大学学报, Vol.39, No.8 (1999)pp.45-48.

(4) Yong Li , Min Guo, et al., “Micro electro discharge machine with an inchworm type of micro feed mechanism”, Precision Engineering, Vol.26, No.1 (2002) pp.7-14.

(5) Li Yong, Zheng Yunfei, et al., “Localized electrochemical micro machining with gap control”, Sensors and Actuators: A-Physical, Vol.108, No.1-3 (2003) pp.144-148.

(6) Chen Xupeng, Li Yong, et al., “Homogeneously catalyzed micro chemical thruster”, Sensors and Actuators: A-Physical, Vol.108, No.1-3(2003) pp.149-154.

(7) 李勇，周骋，等：『采用步进电机驱动的摩擦传动微进给机构』, 清华大学学报，Vol.44, No.2 (2004) pp.170-173.

(8) 陈旭鹏，李勇，等：『采用双弹性元件级联的微小推力丈量方法』，清华大学学报， Vol.44, No.2 (2004) pp.205-208.

(9) Huang Weifeng, Li Yong, et al., “Application of the Lattice Boltzmann Method to Electrohydrodynamics: Deformation and Instability of Liquid Drops in Electrostatic Fields”, Chinese Science Bulletin, Vol.52, No.22 (2007) pp.3319-3324.

(10) H. Tong, Y. Wang and Y. Li, “Vibration-assisted Servo Scanning 3D Micro EDM”, Journal of Micromechanics and Microengineering, Vol.18, No.2 (2008) pp.501-508.

(11) 李勇，佟浩，等：『三维微细电火花伺服扫描加工工艺』，纳米技术与精密工程，Vol.6, No.4（2008）pp. 307-311.

(12) H. Tong, Y. Li, et al., “Servo Scanning 3D Micro-EDM Based on Macro/micro-dual-feed Spindle”, International Journal of Machine Tools & Manufacture, 48 (2008) pp.858-869.

(13) H. Tong, Y. Li, et al., “Experimental Research on Vibration Assisted EDM of Micro Structures with Non-circular Cross Section”. Journal of Materials Processing Technology, Vol 208, No. 1-3 (2008) pp. 289-298.

(14) LI Yong, MA Xiaoyu, et al., “Research on Micro ECM Using Micro Array Electrode”, Proceedings of the 16th International symposium on Electromachining, April. 19-23, 2010, Shanghai,China, pp.335-339.

(15) LI Yong, “An Overview of Research Attempts on Micro Electro Machining at Tsinghua University”, 电气加工会志（Journal of The Japan Society of Electrical Machining Engineers）, Vol.45, No.109 (2011.7) pp.48-53.

(16) TONG Hao, LI Yong, et al., “Experimental Research on Effects of Process Parameters on Servo Scanning 3D Micro Electrical Discharge Machining”, Chinese Journal of Mechanical Engineering, Vol.25, No.1 (2012) pp.114-121.

(17) Tong Hao, Li Yong, “Self-adaptive fuzzy controller with formulary rule for servo control of discharge gap in Micro EDM”, High Technology Letters, Vol.18, No.3 (2012) pp.223-229.

(18) ZHU XiaoGu, HUANG WeiFeng & LI Yong, “Role of step-shape structures and critical failure bubble volume in micro bubble constraint”, Chinese Science Bulletin, Vol.57, No.22 (2012) pp.2941-2946.

(19) 谢晓丹，Duong Camvinh，李勇，等：『超精密切削用刀具超声激振机构的设计』，清华大学学报，Vol.52, No.7, (2012) pp.956-961.

(20) 李勇，李文平，朱效谷：『柔性MEMS减阻蒙皮设计及其制作工艺』，光学精密工程，Vol.20，No.12 (2012) pp.2696-2703.

(21) H. Tong, Y. Li, et al., “Mechanism design and process control of micro EDM for drilling spray holes of diesel injector nozzles ”, Precision Engineering, Vol.37, No.1 (2013) pp.213-221.

(22) TONG Hao, ZHANG Long, LI Yong,“Layer depth constrained servo scanning EDM for 3D microstructures”, Procedia CIRP, Vol.6 (2013) pp.287-292.

(23) Yong Li, Ruiqin Hu, “Micro Electrochemical Machining for Tapered Holes of Fuel Jet Nozzles”, Procedia CIRP, Vol.6 (2013) pp.396-401.

(24) Hao Tong，Long Zhang，Yong Li, “Algorithms and machining experiments to reduce depth errors in servo scanning 3D micro EDM”, Precision Engineering, Vol.38, No.3 (2014) pp.538-547.

(25) K. Zhou, X. G. Zhu, Y. Li, et al., “Fabrication of PDMS Micro Through-holes Using Micromolding in Open Capillaries”, RSC Advances, Vol. 60, No.4 (2014) pp.31988-31993.

(26) 王志强，佟浩，李勇，等：『气膜冷却孔电火花加工用复合功能主轴』，清华大学学报（自然科学版）, Vol.54, No.9（2014）pp.1131~1137.

(27) 朱效谷，李勇，李文平：『电解水式驻留微气泡减阻技术及其可行性分析』，船舶力学，Vol.18, No.10 (2014) pp.1165-1174.

(28) 张龙，李勇，佟浩：『微细电极和孔的电火花加工尺寸一致性工艺』，清华大学学报（自然科学版）, Vol.54, No.11（2014）pp.1460~1465.

(29) Duong Cam Vinh，李朝将，李勇，高兴：『超精密数控机床B旋转轴的可量化对刀方法』，清华大学学报（自然科学版）, Vol.54, No.11（2014）pp.1466~1470.

(30) Long Zhang, Hao Tong, Yong Li, “Precision machining of micro tool electrodes in micro EDM for drilling array micro holes”, Precision Engineering, Vol.39, (2015) pp.100-106.

(31) 孔全存，李勇，等：『三电极微细电解加工脉冲电源』，清华大学学报（自然科学版）, Vol.55, No.3（2015）pp.266~272.

(32) C. J. Li, Y. Li, et al., “Ultra-precision machining of Fresnel lens mould by single-point diamond turning based on axis B rotation”, International Journal of Advanced Manufacturing Technology, Vol. 77, (2015) pp.907–913.

(33) 周凯，朱效谷，李勇：『基于VOF方法的驻留微气泡形状稳定性仿真研究』，船舶力学，Vol.20, No.1-2 (2016) pp.41-47.

(34) TONG Hao, LI Yong, ZHANG Long, “On-machine process of rough-and-finishing servo scanning EDM for 3D micro cavities”, International Journal of Advanced Manufacturing Technology, Vol.82 (2016) pp.1007-1015.

(35) C. J. Li, Y. Li, H. Tong, et al., “An EDM pulse power generator and its feasible experiments for drilling film cooling holes”. International Journal of Advanced Manufacturing Technology, Vol.87, (2016) pp.1813-1821.

(36) Guodong Liu, Yong Li, Quancun Kong, Hao Tong, “Research on ECM Process of Micro Holes with Internal Features”, Precision Engineering, Vol.41, (2017), pp.508–515.

(37) Yong LI*, Kai ZHOU, etal., “Fabrication of micro through-hole array by gas-blowing PDMS-treated polyamide screen for flexible drag reduction skin”, Journal of Micromechanics and Microengineering, Vol.27, No.1 (2017) pp.015001 (7pp).

(38) 高兴，李勇*，钟昊，等：『回转对称微结构光学模具的超精密切削B轴旋转加工工艺』，清华大学学报（自然科学版）, Vol.57, No.2（2017）pp.120~127.

(39) Quancun Kong, Yong Li*, Guodong Liu, et al., “Electrochemical machining for micro holes with high aspect ratio on metal alloys using three-electrode PPS in neutral salt solution”, International Journal of Advanced Manufacturing Technology, Vol. 93, No.5-8 (2017) pp.1903-1913.

(40) Hao TONG, Yong LI*, Long ZHANG, Jun QIAN, “Experimental exploration of wire electro discharge grinding for conical nozzle surfaces”, The International Journal of Advanced Manufacturing Technology, Vol.95, No.1-4 (2018) pp.1233-1241.

(41) Xing Gao, Yong Li*, et al., “Uniform concentrating design and mold machining of Fresnel lens for photovoltaic systems”, The International Journal of Advanced Manufacturing Technology, Vol.96 (2018) pp.451–460.

(42) Guodong Liu, Yong Li*, et al., “Silicon-based tool electrodes for micro electrochemical machining”, Precision Engineering, Vol.52 (2018) pp.425–433.

(43) Chaojiang Li, Bowei Zhang, Yong Li*, et al., “Self-adjusting EDM/ECM high speed drilling of film cooling holes”, Journal of Materials Processing Technology, Vol.262 (2018) pp.95-103.

(44) Hao Tong, Yong Li*, Long Zhang, “Servo scanning 3D micro EDM for array micro cavities using on-machine fabricated tool Electrodes”, Journal of Micromechanics and Microengineering，Vol.28, No.2 (2018) pp.025013(8pp).

(45) Xiang Zhao, Zhixin Jia, Wei Li, Yong Li*, Quancun Kong, “Fabrication of optimized streamlined micro nozzles by hybrid electrochemical techniques”, Journal of Micromechanics and Microengineering, Vol.28, (2018) pp.125006 (12pp).

(46) Zhiqiang Wang, Hao Tong*, Yong Li, Chaojiang Li, "Dielectric flushing optimization of fast-hole EDM drilling based on debris status analysis", The International Journal of Advanced Manufacturing Technology, Vol.97, No.5-8 (2018) pp.2409-2417.

联系方式